Once you have safely parked in a designated tyre-filling area, turn off your car engine and step outside. Look for the recommended tyre pressure which can be found on a sticker either on the inside of your fuel cover or along one of the door frames.
Set the tyre pressure on the air compressor accordingly and fill up your tyres one at a time, making sure that you have the correct unit of measurement – either kPa or psi.
Open a tyre valve cap which will be sticking out of the rim, and press the hose firmly on the valve. When the desired pressure has been achieved, the meter should start beeping. Move on until you have filled all four tyres and remember to cover each valve with the valve caps once again tightly.
Check out the video below to know more about the steps for fill air in your tyres!